Hitachi Table Slide Miter Saw C8FB 216mm Saw Fully Serviced Used

Hitachi Table Slide Miter Saw C8FB2 - 216mm Saw - Fully Serviced - Used

This saw is well-used but in good condition.
The front portion of the saw safety cover is present, but the rear cover is missing.
Accessories include a dust bag.
There are signs of corrosion on the slide shaft, which have been removed as much as possible through rust removal and polishing.
The exterior metal parts have been repainted silver and polished. Rust removal and polishing have been performed as much as possible.
Compound cuts (angle + bevel) allow for processing of rafters.
The saw is used but cuts well.
The internal mechanism is ready for immediate use.

The internal mechanism has been disassembled, cleaned, inspected, adjusted, and serviced, and is in good condition. You can use it with confidence for a long time.
All parts have been disassembled, cleaned, lubricated, and the base plate has been polished.
The slide and rotation parts have also been disassembled, cleaned, lubricated, and adjusted.
The slide rail parts have been cleaned, lubricated, and adjusted for smooth movement.
The automatic saw brake is functional and operating normally.
Additionally, the rear saw guide and the plastic part in the center of the base plate show some minor wear and chipping, but this does not affect their function or stability.

Cleaned and adjusted. The interior has also been cleaned.
The motor's rotating carbon brushes and commutator are in good condition with no abnormalities.
The saw vertical and right-angle adjustments have been inspected and adjusted.
Bearings have been inspected and lubricated. All other moving parts have been disassembled and had their grease replaced.
There are no abnormalities or issues affecting operation.
Switches have also been inspected.
Operation has been confirmed after reassembly.

Table and saw angles can be easily set with a single touch.
Ideal for cutting baseboards, picture frames, crown molding, and interior finishing materials. Lightweight and compact design makes it perfect for on-site work.
Product Description
● For cutting baseboards, picture frames, crown molding, and interior finishing materials.
● Lightweight and compact design, ideal for carrying to job sites.
● Easy angle setting (table angle left and right 45 degrees, saw tilt left 45 degrees).
■ Specifications
Model Number: C8FB2
■ Power Supply: 100V 50/60Hz
■ Saw Used: Outer diameter 216mm x Hole diameter 25.4mm
■ Weight: Approx. 19kg
Maximum cutting height: 65mm at 0 degrees
45mm at 45 degrees
Current: 11A, 4900 RPM

All items shown in the images are included.
For shipping, some parts will be disassembled for packing.
The item will be wrapped in bubble wrap and partially packed with cardboard.
We appreciate your understanding.
Please proceed with the transaction with the above in mind.