Immersion Heater Electric Water Heater Rod 1500W (with wire scrubber and Japanese manual)

1500W Stainless Steel Electric Immersion Heater Rod, Fast Heating with 1.5m Power Cord.

- Product Name: Electric Immersion Heater Rod
- Rated Voltage: 100V-120V
- Rated Power: 1500W
- Size: 26cm x 5cm
- Power Cord Length: 1.5m
- Heating Material: Stainless Steel
- Usage Instructions: Must be fully submerged in water

Energy Saving & Fast Heating: The electric immersion water heater has a power of 1500W. It can boil 10 liters of water in about 4 minutes. However, the specific heating time depends on the ambient temperature. Heating 10 liters of water in winter will take slightly longer than in summer. A thermometer is not required; you can visually see when the water is hot. The power consumption is 1.5 kWh, saving on gas costs for baths. (This product requires constant supervision during use.)
Easy Operation: Fill a container with water, ensuring the pool heater is completely submerged. Plug the power cord into a grounded outlet. Before plugging in the heater, confirm it is fully submerged in water, then connect the power for easy use. A scouring pad is included as a gift. Due to water quality, the internal core absorbs impurities from the water. Over time, when heating water, floating matter or sediment may appear. Unscrew the circular cover and clean the internal core thoroughly with the scouring pad.
Automatic Power-Off Heating: This 1500W electric water heater features high power, energy saving, fast heating, and an automatic power-off function. When the water reaches 70°C, the water heater will automatically shut off, and the indicator light will turn off. Please unplug the water heater immediately after heating the water. The automatic power-off function will repeatedly heat as the water temperature drops. Repeated heating can cause water to evaporate, and if the water level falls below the heater's temperature sensor, it can lead to a fire. For safety, please use the heater correctly.
High Performance: This product has passed PSE safety certification testing and features an automatic shutdown function with a product lifespan of over 100,000 hours. It automatically shuts off when the water temperature reaches approximately 70°C. If not unplugged, it will reheat when the water temperature drops to about 50°C. (Do not touch the water: Avoid touching the water while it is heating.)

Thank you for viewing.